two-component epoxy glue

The packaging 2 x 20 g. EPOKSYL - two-component epoxy adhesive in black color designed for bonding metals, ceramics, granite, marble, plastic, wood, etc.. It creates a very strong joints, resistant to acids, alkalis, oils, solvents and salt water. Especially recommended for bonding and filling cavities elements plumbing and heating systems. How to use: Make sure that the glued surfaces are clean, dry and free of grease. If necessary, clean with sandpaper and degrease solvent. Squeeze on stiff cardboard the same amount of both tubes and mix thoroughly. The mixture thinly on both surfaces and press firmly to each other. Quickly remove the excess glue. Allow to stand at room temperature. It is preferred to ensure good contact pressure for at least several hours. EPOKSYL adhesive has cured after 1-1.5 hours, but reaches full strength after approx. 48 hours. The prepared adhesive mass is suitable for use for 1 hour. It is not recommended for bonding at a temperature lower than 15C